Connecting The Base - Siemens Gigaset DL500A User Manual

First steps

Connecting the base

The following diagram is an overview of all connections for your base.
The individual connections are described in detail below.
PC
7
Follow the steps in the order given below:
1 Connect the receiver to the base.
2 Connect the base to the telephone network.
3 Connect the base to the mains power supply.
4 Connect the base to the router for accessing the Internet (connection via router
and modem or via router with integrated modem) and for configuring the base
via the Web configurator.
5 Connect a wire-bound headset to the base.
*) Additional device-specific connections:
6 Gigaset DX600A ISDN/DX800A all in one:
Connect the base to a fax device.
7 Gigaset DX800A all in one: You can connect a PC to the base via the second LAN
socket LAN2 (optional) – e.g., to connect the PC to the router. The base takes on
the task of a switch.
10
*)
4
5
*)
6
3
2
1