Gigaset 4010 Classic, GB/IRL, A31008-G4010-B101-1-7619
Press keys:
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
BASE SET
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
ADD FEATURES
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
DIAL MODE
NNNNNNN NNNNNNN
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
BASE SET
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
ADD FEATURES
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
TBR
NNNNNNN NNNNNNN
Connecting the base station to
a PABX
Dialling mode and flash time
Step 1: Changing the dialling mode
It is necessary to change the dialling mode only if your
PABX does not operate with the preset tone dialling
(DTMF - dual-tone multifrequency. Please refer to the
operating instructions of your PABX.
Options:
– Tone dialling (DTMF),
– Dial pulsing (DP).
NNNNNNNNNNNN
Open the menu.
MENU
Select the menu item and confirm.
Select the menu item and confirm.
Confirm.
Select the required dialling mode and confirm.
Step 2: Setting the flash time:
Prerequisite:
Your PABX requires a flash time different to the preset
flash time, Please refer to the operating instruc-
tions of your PABX.
NNNNNNNNNNNN
Open the menu.
MENU
Select the menu item and confirm.
Select the menu item and confirm.
Select the menu item and confirm.
Select the flash time and confirm.
80 ms, 100 ms, 120 ms, 180 ms, 250 ms, 300 ms,
600 ms.
¬
The current setting is marked with
anlagen.fm
Connecting the base station to a PABX
11.06.01
'
.
51