Locating A Handset ("Paging"); Making Internal Calls - Siemens Gigaset E360 User Manual

Using several handsets

Locating a handset ("Paging")

You can locate your handset using the base
station.
¤
Press the registration/paging key ÷ on
the base station (page 1) briefly.
¤
All handsets will ring at the same time
("paging"), even if the ring tones are
switched off.
Ending paging
Briefly press the registration/paging key ÷
on the base station (page 1) or press the talk
key c on the handset.

Making internal calls

Internal calls are free calls between handsets
that you have registered on the same base
station. In order to be able to initiate an
internal call, one of the speed dialling keys
must be programmed for internal calls (see
page 14).
Calling other handsets
Press the relevant speed dialling key
(é ... ì) which is programmed for inter-
nal calls when the handset is in idle mode.
Acknowledge the query Call home internal?
with Yes. You will see the message Calling all
handsets on the display.
Note:
If no user connects, the handset switches to idle
mode after 3 minutes.
Answering an internal call
Your phone rings and the internal number of
the caller is displayed on the screen, for
example 2.
Press the talk or handsfree key c/d on
the handset to answer the call.
Ending a call
Press the end call key a on the handset .
18
Transferring a call to another
handset/internal consultation
You are calling an external subscriber.
¤
Initiate an internal call, see "Calling other
handsets" auf Seite 18. (You can press the
§Back§
display key during the internal call
and are connected again to the external
subscriber.)
When an internal party answers:
u
To transfer to the internal party, press
the end call key a on the handset .
u
The internal party must end the call to
terminate the consultation. You are
reconnected with the external caller.
Note:
You can also press the end call key a before
connecting the internal caller. If the internal
party does not answer, or their phone is in use,
the call will automatically return to you.
Accepting a waiting call
If you get an external call while conducting
an internal call, you will hear the call waiting
tone (short tone). The caller's number or
name will appear in the display if calling line
identification is enabled.
¤
Press the end call key a on the handset
to end the internal call.
¤
Press the talk key con the handset to
answer the external call.