Locating A Handset ("Paging"); Registering Handsets Manually; De-Registering Handsets; Using Multiple Handsets - Siemens Gigaset A120 Instructions Manual

Locating a handset ("Paging")

You can locate your handset using the base.
¤
Briefly press the registration/paging key on the base (
All handsets will ring at the same time ("paging"), even if the ringers are switched off.
Ending paging: Briefly press the registration/paging key on the base (
a
key on the handset.

Registering handsets manually

You can register up to four handsets on your base station. Each additional handset must be registered on the base sta-
tion in order for it to work properly!
1) On the handset
¤ u
¤
MENU Settings
¤ ¤
OK Registering is displayed.
2) On the base
Within 60 seconds, press and hold the registration/paging key on the base (
Registration takes approx. 1 minute. Handsets are assigned the lowest available internal number (1-4). If the internal
numbers 1–4 are already assigned to other devices, the number 4 will be overwritten.

De-registering handsets

You can de-register all other registered handsets from each of the registered Gigaset handsets.
¤ u
¤
MENU Settings
register. The handset you are currently using is indicated by <.
¤
OK

Using multiple handsets

Making internal calls
Internal calls are free calls to other handsets that are registered to the same base station.
2 handsets are registered
Press the display key INT, the other handset is called.
More than 2 handsets are registered
Calling a specific handset
¤ ~
INT (1...4, enter internal number of the handset) or
¤ u
INT (Select the internal party)
Calling all handsets ("group call")
¤ P ¤ u
INT or INT Call all
When a participant answers you can speak to them. To end the call, press
Internal consultation call/connecting a call
You are in conversation with an external participant. Press the INT display key and call one or all handsets. The external
participant hears the hold music. When the internal participant answers: If necessary, announce the external call.
Either press the end call key
"
press the display key
When transferring a call you can also press the end call key
Listening in to an external call
You are conducting an external call. An internal participant can listen in on this call and take part in the conversation
(conference). Prerequisite: The Listening in function must be activated.
Activating/deactivating listening in
¤ u
¤
MENU Settings
¤ u
¤
OK Handset OK
¤ u
¤
OK Handset OK
b ¤
¤
OK or
b ¤
¤
OK or all handsets are called
a
(the call is transferred to the internal participant), or
. You are reconnected with the external participant.
¤ u ¤ u
¤
OK Base OK
7
¢
page 1).
¢
¤ u
¤
Register HS Enter the base system PIN (default setting: 0000)
¤ u ¤ u
De-register HS
¤ ¤
OK Enter the base system PIN (default setting: 0000)
the handset is called
a
before the internal participant answers.
‰
¤
Listening in OK (
page 1) or press the talk key
¢
page 1) for approx. 3 seconds.
Select the internal party you wish to de-
a
.
= on)
b
or the end call