Using The Network Mailbox; Using The Network Mailbox For Setting; Speed Dialling; Viewing The Network Mailbox Message - Siemens Gigaset E360 User Manual

Using the network
mailbox
The network mailbox is your network pro-
vider's answering machine. You cannot use
the network mailbox unless you have
applied to your network provider.

Using the network mailbox

for setting speed dialling
With speed dialling, you can direct dial the
network mailbox.
The integrated answering machine is pre-
configured for speed dialling. You only have
to enter the number.
Configuring the network mailbox for
speed dialling and entering the
network mailbox number
¢ ¢
§Menu§
Voice Mail
¢ ¢
§OK§
Network Mailbox
¢
(‰ = on) Enter the number of the
network mailbox
This setting is now valid for all registered
handsets.
Calling the network mailbox
1
Press and hold. This connects
you directly to the network
mailbox.
Viewing the network mailbox
message
When a message arrives for you, you get a
call from the network mailbox. If you have
requested Calling Line Identification, the dis-
play shows the network mailbox number. If
you accept the call, the new messages are
played back. If you do not accept the call, the
network mailbox number will be stored in
the list of missed calls (page 15).
¢
§OK§
Set Key 1
¢
§OK§
¢
§OK§
Using the network mailbox

Using several handsets

Registering handsets

You can register up to four handsets on your
base station.
Automatic registration Gigaset E36 on
Gigaset E360, see page 6.
Manual registration Gigaset E36
on Gigaset E360.
You must activate manual registration of the
handset on both the handset and the base
station.
After it has registered, the handset returns to
idle status. If several handsets are registered
on the base, the internal number is shown in
the display after registration, e.g. 2.
The registration process is cancelled after
60 seconds. If the handset has not registered
within this time, repeat the process.
On the handset
¢ ¢
§Menu§
Settings
¢ ¢
§OK§
Register Handset
¢
Enter system PIN of base station
(default status: 0000)
On the base station
÷
Press and hold the registration/
paging key on the base station
(page 1) (min. 1 sec.).
Registering other handsets
You can register other Gigaset handsets and
handsets for other devices with GAP func-
tionality as follows.
On the handset: Start to register the hand-
set as described in its user guide.
On the base station: Press and hold the
registration/paging key ÷ on the base sta-
tion (page 1) (min. 1 sec.).
¢
§OK§
Handset
¢
§OK§
¢
§OK§
17