Writing And Editing A Text Message - Siemens Gigaset E360 User Manual

Base station power consumption
In standby mode: approx. 2W
During a call: approx. 3W
General specifications
DECT standard is supported
GAP standard is supported
Range up to 300 m outdoors,
up to 50 m indoors
Base station power 230 V ~/50 Hz
supply
Environmental +5 °C to +45 °C;
conditions for
20 % to 75 % relative humid-
operation
ity
Writing and editing a text
message
The following rules apply when writing a
text message:
The cursor is controlled with t s.
u
u
Characters are added to the left of the
cursor.
Press the hash key # briefly to switch
u
from "Abc" mode to "123", from "123" to
"abc" and from "abc" to "Abc" (uppercase:
1.st letter uppercase, all others lower-
case). Press the hash key # before
entering the letter.
Press the hash key # three times:
u
Shows the selection line of the characters
assigned to the hash key.
u
The first letter of the name of directory
entries is automatically capitalised, fol-
lowed by lowercase letters.
Editing text
When you press a key and hold it, the char-
acters of that key appear in the bottom dis-
play line and are highlighted one after the
other. When you release the key, the high-
lighted character is inserted into the input
field. For how to enter special characters, see
page 26.
The display briefly shows whether upper-
case or lowercase letters or digits are
selected when you switch from one mode to
the next: The bottom text line displays "abc -
> Abc", "Abc -> 123" or "123 -> abc".
Order of directory entries
The directory entries are usually sorted in
alphabetical order. Spaces and digits take
first priority. The sort order is as follows:
1. Space (shown here as s)
2. Digits (0–9)
3. Letters (alphabetical)
4. Other characters
To get round the alphabetical order of the
entries, insert a space or a digit in front of the
name. These entries will then move to the
beginning of the directory. Names that you
have preceded with an asterisk will move to
the end of the directory.
Appendix
25