Table of Contents
Advertisement
Setting the base
Setting the base
The base settings are carried out using a reg-
istered Gigaset S800H handset.
Changing the base Gigaset
S800A ringtones
u
Volume:
You can choose between five volumes (1–
5; e.g., volume 3 = Š) and the "cre-
scendo" ringtone (6; volume increases
with each ring = ‡).
u
Ringtones:
You can select a ringtone from a list of
pre-loaded melodies.
In idle status:
Ï
¢
¢
v
Audio Settings
¢
Ringtones (Base)
¤
You can enter data in the following fields:
r
Set volume.
s
Scroll to the next line.
r
Set melody.
§Save§
Press the display key to save the
setting.
•
Activating/deactivating
music on hold
Ï
¢
¢
v
Audio Settings
¢
Music on hold
§Change§
Press
to activate or deactivate the
music on hold (³ = on).
74
•
Repeater support
With a repeater, you can increase the range
and signal strength of your base. You will
need to activate repeater mode. This will ter-
minate any calls that are in progress at the
time.
Prerequisite: A repeater is registered.
Ï
¢
¢
v
System
§Change§
Press
to activate or deactivate
repeater mode (³= on).
Please note
u
Eco Mode / Eco Mode+ (
and repeater support cancel each
other out, i.e., if you use a repeater,
you cannot use Eco Mode or Eco
Mode+.
u
Encrypted transmission activated at
the factory is deactivated when a
repeater is registered.
•
Protecting against
unauthorised access
Protect the system settings of the base with
a PIN known only to yourself. The system PIN
must be entered when, for example, regis-
tering/de-registering a handset to/from the
base or when restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting: 0000) to a 4-digit
PIN known only by you.
Gigaset S800A: Setting a system PIN facili-
tates remote operation of the answering
¢
machine (
page 54).
Ï
¢
¢
v
System
~
Enter the current system PIN
and press
~
Enter your new system PIN and
§OK§
press
¢
Repeater Mode
¢
page 57)
¢
System PIN
§OK§
.
.
Advertisement
Table of Contents
