Connecting The Headset; Connecting The Usb Data Cable - Siemens Gigaset S800 User Manual

Connecting the headset

Connecting the USB data cable

You can connect a standard USB data cable with a mini-B connector to the back of
your handset to connect the handset to a PC (
¤
Remove the belt clip (if attached)
¢
( page 15).
¤
Remove the battery cover (
¤
Connect the USB data cable to
USB socket
Please note
Please connect your handset directly to
the PC; do not connect via a USB hub.
After removing the plastic cover, you can connect a head-
set to the left-hand side of your telephone with the 2.5 mm
jack connector.
See the relevant product page at www.gigaset.com for
information on recommended headsets.
The headset volume corresponds to the settings for the
handset volume (
After using the headset, replace the plastic cover to enable
optimum sound in speaker mode.
¢
page 14).
1 .
¢
page 70).
¢
page 84).
First steps
1
19