Siemens Gigaset S800 User Manual page 67

Using Bluetooth devices
Activating/deactivating Bluetooth
mode
ò
¢ ¢
v
Activation
§Change§
Press do activate or deactivate Blue-
tooth mode (³ = activated).
In idle status, the ò icon on the handset
shows that Bluetooth mode is activated)
¢
( page 4).
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be no
more than 10 m.
Please note
u
If you register a headset, any headset
that is already registered will be over-
written.
u
If you would like to use a headset with
your handset that is already registered
to another device (e.g. to a mobile
phone), please deactivate this connec-
tion before you start the registration
process.
ò
¢ ¢
v
Search for Headset / Search
Data Device
The search can take up to 30 seconds.
Once the device has been found, its name
will be shown on the display.
§Options§
Press the display key.
Trust Device
Select and press
~
Enter the PIN for the Bluetooth
device you want to register and
§OK§
press
The device is saved in the list of known
devices.
66
§OK§
.
.
Cancelling/repeating current search
To cancel search:
§Cancel§
Press the display key.
Repeat search if necessary:
§Options§
Press the display key.
Repeat Search
Select and press
Editing the list of known (trusted)
devices
Open list
ò
¢ ¢
v
Known Devices
A corresponding icon appears next to each
device name in the list displayed:
Icon Meaning
ô
Bluetooth headset
õ
Bluetooth data devices
If a device is connected, the corresponding
ò
symbol is shown in the header of the dis-
play.
Viewing entries
¢
s (select entry)
Open list
§Options§
Press the display key.
View Entry
Select and press
Device name and address are
displayed.
Back with
Deregistering Bluetooth devices
¢
s (select entry)
Open list
§Options§
Press the display key.
Delete Entry
Select and press
Please note
If you deregister an activated Bluetooth
device, it may try to reconnect as an
"unregistered device".
§OK§
.
§OK§
.
§OK§
.
§OK§
.