Making Calls; Making An External Call; Ending A Call; Accepting A Call - Siemens Gigaset S800 User Manual

Making calls

Making calls
If the backlight is deactivated (
is switched on by pressing any key. In this
case the pressed key has no other function.

Making an external call

External calls are calls using the public tele-
phone network.
~ c
Enter the number and press the
talk key.
or:
c ~ Press and hold the talk key c
and then enter the number.
You can cancel the dialling operation with
the end call key a.
You are shown the duration of the call while
the call is in progress.
Please note
Dialling with the directory (
¢
call list ( page 39), redial list
¢
( page 39) and automatic redial
¢
( page 39) saves you from repeatedly
keying in phone numbers.
Continuing a call on a Bluetooth
headset
Precondition: Bluetooth is activated; a con-
nection has been established between the
Bluetooth headset and the handset
¢
( page 66).
Press the talk key on the Bluetooth headset;
it may take up to 5 seconds to establish a
connection to the handset.
During the call you can adjust the volume of
the earpiece and microphone with the side
keys.
For further details about your headset, see
the user guide issued with it.

Ending a call

a
Press the end call key.
30
¢
page 69) it
¢
page 35),

Accepting a call

The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing talk key c.
Accept the call by:
¤
Pressing the talk key c.
¤
Pressing the speaker key d.
¤
Gigaset S800: press the display key
§Accept§
.
¤
Gigaset S800A: press the display key
Ô
to divert the call to the answering
¢
machine ( page 53).
If the handset is in the base/charger and the
Auto Answer function is activated
¢
( page 70), the handset automatically
answers the call when you remove it from
the base/charger.
To deactivate the ringtone, press the
display key. You can accept the call as long as
it is displayed on the screen.
Accepting a call on a Bluetooth
headset
Precondition: Bluetooth is activated; a con-
nection has been established between the
Bluetooth headset and the handset
¢
( page 66).
Only press the talk key on the headset
when the headset rings; it can take up to 5
seconds.
During the call you can adjust the volume of
the earpiece and microphone with the side
keys.
For further details about your headset, see
the user guide issued with it.
§Silence§