Setting The Base; Changing The Gigaset S795 Base Ringtones; Activating/Deactivating Music On Hold; Protecting Against Unauthorized Access - Siemens Gigaset S790 Manual

Setting the base

Setting the base
The base settings are changed using a regis-
tered Gigaset S79H handset.
Changing the Gigaset S795
base ringtones
u
Volume:
You can choose between five volumes (1–
5; e.g., volume 3 = Š) and the "cre-
scendo" ringtone (6; volume increases
with each ring = ‡).
u
Ringtones:
You can select a ringtone from a list of
pre-loaded melodies.
In idle status:
Ï
¢ ¢
v
Audio Settings
¢
Ringtones (Base)
¤
You can enter data in the following fields:
r
Set volume.
s
Scroll to the next line.
r
Set melody.
§Save§
Press the display key to save the
setting.
•
Activating/deactivating
music on hold
Ï
¢ ¢
v
Audio Settings
¢
Music on Hold
§Change§
Press to activate or deactivate the
music on hold (³ = on).
•
Protecting against
unauthorized access
Protect the system settings of the base with
a PIN known only to yourself. The system PIN
must be entered when, for example, regis-
tering/de-registering a handset to/from the
base or when restoring the default settings.
58
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting: 0000) to a 4-digit
PIN known only by you.
Gigaset S795: Setting a system PIN facilitates
remote operation of the answering machine
¢
( page 42).
Ï
¢ ¢
v
System
~
Enter the current system PIN
and press
~
Enter your new system PIN and
§OK§
press
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code 0000:
1. Disconnect the power cable from the
base.
2. Hold down the registration/paging key on
the base while reconnecting the power
cable to the base.
3. Hold down the key for at least 5 seconds.
4. The base has now been reset and the sys-
tem PIN set to 0000.
Please note
All handsets are de-registered and must
be re-registered. All settings are reset to
the factory settings.
•
Resetting the base to the
factory settings
When the settings are restored:
u
Date and time are retained
u
Handsets are still registered
u
Eco Mode is activated deactivated,
u
The system PIN is not reset.
Ï
¢ ¢
v
System
~
Enter the system PIN and
§OK§
press
§Yes§
Press the display key.
¢
System PIN
§OK§
.
.
¢
Base Reset
.