Activating/Deactivating Advisory Tones; Setting Your Own Area Code; Restoring The Handset Default Settings; Advisory Tones - Siemens Gigaset SL78H Manual

Handset settings
Activating/deactivating

advisory tones

Your handset uses advisory tones to tell you
about different activities and statuses. The
following advisory tones can be activated/
deactivated independently of each other:
u
Key click: every key press is confirmed.
u
Acknowledge tones:
– Confirmation tone (ascending tone
sequence): at the end of an entry/set-
ting and when a new entry arrives in
the call list
– Error tone (descending tone
sequence): when you make an incor-
rect entry
– Menu end tone: when scrolling to the
end of a menu
u
Battery low beep: the battery requires
charging.
In idle status:
Ï
¢ ¢
v
Audio Settings
Tones
¤
Change multiple line input:
Key Tones:
Select On or Off.
Confirmation:
Select On or Off.
Battery:
Select On, Off or In Call. The battery
warning tone is only activated/deacti-
vated and only sounds during a call.
§Save§
Press the display key.
46

Setting your own area code

In order to transfer phone numbers (e.g. in
vCards), it is essential that your area code
(international and local area code) is saved
on the phone.
Some of these numbers are already preset.
v
Check that the (pre)set area code is correct.
¤
q
r
Ñ
~
§Save§
Example:
Area Codes
International code:
¢
Advisory
00 - 49
Local area code:
0 - [ ]
Û
Restoring the handset
default settings
You can reset individual settings and
changes that you have made.
The following settings are not affected by
the reset
u
u
u
u
v
§Yes§
Ï
¢ ¢
Telephony
Change multiple line input:
Select/change input field.
Navigate in the input field.
If necessary, delete number:
press the display key.
Enter number.
Press the display key.
Save
Registration of the handset to the base
Date and time
Calendar entries
Entries in the directory, call-by-call list,
call lists and the content of the resource
directory
Ï
¢ ¢ ¢
Reset
Press the display key.
¢
Area Codes
Handset Reset