Table of Contents
Advertisement
Fig. 19
Latch "closed "with
blower cover in place.
Burn pot clean-out is
closed.
Fig. 21
Exposed blower wheel
and flue opening,
NOTE: ESP probe is
visible.
Fig. 22
Maintenance
Fig. 20
Latch "open "with
blower cover partly
removed. Burn pot clean-
out is open.
ESP probe
Blower cover
removed.
ESP Probe
Be careful not to
damage ESP probe
when cleaning with
brush.
8. Clean the blower wheel with a brush and a vacuum cleaner.
9. Use a brush to clean the flue, being careful not to damage
the ESP probe, see Fig. 30. The flue goes straight through
into the vent pipe (Fig.27) therefore, the vent pipe can also
be cleaned to some extent through the flue outlet.
10. Reinstall blower cover and relatch.
11.Slide ash pan into stove and latch into place.
Brush not
supplied. Can be
found in hardware
stores.
Fig. 23
Soot and Fly Ash
The products of combustion will contain small par-
ticles of fly ash. The fly ash will collect in the ex-
haust venting system and restrict the flow of the
flue gases. Incomplete combustion, such as oc-
curs during startup, shutdown, or incorrect op-
eration of the room heater, will lead to some
soot formation which will collect in the exhaust
venting system. The exhaust venting system
should be inspected at least once every year
to determine if cleaning is necessary.
16
P38+ Pellet Stove
Fig. 24
Advertisement
Table of Contents
