Fisher-Price RIDE-ON 74287 Assembly And Owner's Manual page 21

40
Neck of
Vehicle Body
Steering
Stop
• Fit the tab on the steering stop into the curved slot in the
lower steering bushing
• Hold the steering stop in place.
• Slide the handlebar assembly on the neck of the vehicle
frame and over the steering stop
41
.354"
.354 Cap Nut
• Place a .354 (small diameter) cap nut on a flat surface,
inside up.
• Fit the end of the fork axle into the cap nut.
• Tap the opposite end of the fork axle with a hammer to
secure the cap nut on the axle. Pull on the cap nut to
make sure it is securely assembled.
2
1
Handlebar
Assembly
.
1
.
2
Fork Axle
.354 (Small Diameter)
Cap Nut
Assembly
42
.354 Cap Nut
• Slide the fork axle up through the bottom of the front
fork, through the neck and steering stop, and out the top
of the front fork.
• Fit a .354 (small diameter) cap nut on the end of the
fork axle.
• Support the fork axle and tap the cap nut with a hammer
to secure it on the end of the axle.
Hint: You may need the help of another adult to hold the
front axle in place while you secure the cap nut.
• Pull on the .354 cap nut to make sure it is secure on the
fork axle.
21
.354 (Small Diameter)
Cap Nut
.354"
Front
Fork
Fork Axle