Fisher-Price RIDE-ON 74287 Assembly And Owner's Manual page 18

29
Handlebar
Harness
Right
Handlebar
• Locate the right handlebar. The right handlebar has an
additional hole in the grip area.
• Slide the base end of the wire cover (with handlebar
harness) onto the right handlebar.
30
Right
Handlebar
• Continue to slide the wire cover onto the right handlebar.
Fit the wire cover against the curve in the handlebar,
near the grip area.
• Fit the switch cover to the handlebar, making sure that
you align the screw hole in the switch cover with the
screw hole in the handlebar.
Hint: The switch cover should overlap the end of the wire
cover slightly.
Assembly
Wire Cover
Base End
Grip Area
Additional Hole
Right Handlebar
Switch Cover
Wire Cover
31
• Fit the right mirror peg through the hole in the right
handlebar and into the hole in the switch cover.
32
Right Mirror
• While holding the right mirror and switch cover firmly
together, insert two #8 x
switch cover.
• Tighten both screws using a Phillips screwdriver.
Do not over-tighten.
18
Right Mirror Peg
Switch Cover
Switch Cover
3 / " screws through the
4