Fisher-Price RIDE-ON 74287 Assembly And Owner's Manual page 12

Large
4
Rectangular
Opening
Square
Opening
High Speed
Hook-Up
• Position the vehicle body on top of the vehicle frame.
• Fit motor harness connector up through the large
rectangular opening in the vehicle body.
• Fit the high speed hook-up connector through the
square opening near the front of the vehicle body.
5
Vehicle
Frame
• Insert four #8 x 3 / " screws through the vehicle body and
4
into the vehicle frame. Make sure the holes in the
vehicle body and frame are aligned.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Assembly
Vehicle
Body
Motor
Harness
Connector
• Fit the motor harness between the vehicle body tabs.
Vehicle Frame
Vehicle
Body
• Fit the tabs on the left footboard into the slots in the left
Hint: You may need to squeeze the left footboard in order
to align the tabs with the slots.
• Insert two #8 x
12
6
Tab
Tab
Narrow
Rectangular
Opening
Top View
7
Slots
Tab
side of the vehicle frame. Make sure both tabs are in
the slots.
3 / " screws into the left footboard as
4
shown. Tighten the screws using a Phillips screwdriver.
Do not over-tighten.
Motor
Harness
Tab
Left
Footboard