Video Input Assignment; System Test After Installation - Blaupunkt TravelPilot DX-N Installation Instructions Manual

Installation

Video input assignment

The video input socket is intended for future applications. For
information on connection options, please contact a Blaupunkt
dealer or our hotline. See connection diagram for assignment.
15
10
Pin Description Input /
Ouput
1 EXT_R E
2 EXT_G E
3 EXT_B E
4 V_GND E
5 EXT_SYNC E
6 NC -
7 U14 A
8 STANDARD SWITCH E
9 EARTH A
10 NC
11 N. B.
12 Switch on EXT. E
13 UB A
14 Screen switch A
15 MP_U53 A
1
Comment
Red input
Green input
Blue input
Video earth
Synchronisation input
Low = PAL Format / High = NTSC Format
Low = Off / High = On
Low = Mirror image / High = Normal image

System test after installation

The system test allows you to test the external connections to
see that they are working correctly.
Proceed as follows:
1. Turn off TravelPilot DX-N
2. Press the button and keep it pressed.
3. Turn on the TravelPilot DX-N and release the
the service menu appears.
4. Using the button, select the test menu
OK button.
5. Now select the required test using the
the button and follow the on-screen instructions.
OK
If the test was completed successfully, the menu item will be
labelled with a tick. If an error occurs, an appropriate notice
will be displayed.
6. Close the service menu by pressing the
8
button when
and press the
or button, press
button.