Connect Cradle; Pin Assignment D-Sub Connect Cradle - Blaupunkt TravelPilot Lucca 5.2 Operating And Installation Instructions

Connect Cradle

Connect Cradle
The Connect Cradle allows you
to transfer a composite video
signal (back-up camera, DVD
player).
The 4-pole 3.5-mm jack con-
nector contains one audio and
video input. As soon as a signal

Pin assignment D-sub Connect Cradle

Pin
1 5
6 10
11
15
42
Type
1 Ignition IN
2 GND
3 GND
4 Analog OUT left
5 GND TMC Return
6 Battery Plus
7 Speed Pulse Signal
8 TMC IN
9 Analog OUT right
10 TMC-Antenna
11 GND
12 Dimming IN
13 TMC-OUT
14 Audio mute
15 Analog GND
is present at the Connect Cradle and the Lucca
is installed in the Connect Cradle, the image and
sound of the source is shown on the display of the
Lucca (Lucca must be switched on).
Description
Car ignition signal IN (12V)
GND
GND
Audio line OUT left channel
TMC antenna Ground
12/24 V DC Power IN
Continue nav. in case of GPS signal lost (5V)
Car Audio TMC Signal IN (3.7-5V)
Audio line OUT right channel
TMC signal Antenna (75-cm wire antenna)
GND
Illumination Signal IN (12V)
Car Audio TMC Signal OUT (3.7-5V)
Audio mute OUT (5V)
GND