Adjusting The Burn Rate; Approximate Air Control Settings; Ash Removal - Lopi Liberty Owner's Manual

Adjusting the Burn Rate

Use the air control slider to control the burn rate of the stove. See the illustration below for details.
Use the air control to
change the burn rate.
Low Burn
(air control closed)

Approximate Air Control Settings

The air control becomes hot during operation - use gloves or a tool to prevent burns.
The air control may take several minutes to influence the burn rate. When making adjustments, you
may wish to let the stove burn for 10 minutes to gauge performance.

Ash Removal

Ashes should be placed in a metal container with a tight fitting lid. Other waste is not placed in
this container. The closed container of ashes should be placed on a non-combustible floor or on
the ground, away from all combustible materials, pending final disposal. If the ashes are
ASHES
disposed of by burial in soil or otherwise locally dispersed, they should be retained in the closed
container until all cinders have thoroughly cooled.
© Travis Industries
Operating Your Appliance
High Burn
(air control open)
100-01274
Overnight Burn Fully out to 7.3mm open
Medium Burn 7.3mm to 8.3mm open
Medium High Burn 8.3mm to 11.5mm open
High Burn 11.5mm open top pushed fully in
17
4111121