Adjusting The Burn Rate; Approximate Air Control Settings - Lopi Cape Cod Wood Stove Owner's Manual

Adjusting the Burn Rate

Use the air control slider to control the burn rate of the stove. See the illustration below for details.

Approximate Air Control Settings

The air control becomes hot during operation - use gloves or a tool to prevent burns.
The air control may take several minutes to influence the burn rate. When making adjustments, you
may wish to let the stove burn for 10 minutes to gauge performance.
For Overnight burns open the ash pan drawer may be opened slightly (15mm) for up to 5 minutes to
allow the wood to ignite. After 5 minutes close the ash pan drawer and burn on high (air control pulled
out) until the fire is thoroughly established (15 minutes). Then close the air control (push in).
© Travis Industries
Operating Your Appliance
High Burn
Medium High Burn
Medium Burn
Overnight Burn
100-01383
Use the air control to
change the burn rate.
Low Burn
(air control closed) (air control open)
Fully pulled out
Fully pulled out to 8mm in
8mm in to fully pushed in
Fully pushed in
21
High Burn
4140402