Manufacturer Liability; Identification Plate; Disposal - Smeg Oven User Manual

For this appliance
• Do not obstruct ventilation openings and
heat dispersal slots.
• Do not insert pointed metal objects
(cutlery or utensils) into the slots in the
appliance.
• Do not rest any weight or sit on the open
door of the appliance.
• Take care that no objects are stuck in the
doors.
• Do not use the appliance to heat rooms
for any reason.
• If cracks or fissures form, or if the glass
ceramic cooking surface breaks, turn off
the appliance immediately. Disconnect
the power supply and call Technical
Support.
• People who have pacemakers or other
similar devices fitted must make sure that
the operation of these devices is not
jeopardised by the inductive field, whose
frequency range is between 20 and 50
kHz.
• In conformity with the provisions
regarding electromagnetic compatibility,
the electromagnetic induction cooking
hob comes under group 2 and class B
(EN 55011).

1.5 Manufacturer liability

The manufacturer declines all liability for
damage to persons or property caused by:
• use of the appliance other than the one
envisaged,
• non-observance of the user manual
provisions,
• tampering with any part of the
appliance,
• use of non-original spare parts.
Instructions

1.6 Identification plate

The identification plate bears the technical
data, serial number and brand name of the
appliance. Do not remove the identification
plate for any reason.

1.7 Disposal

This appliance must be disposed of
separately from other waste
(Directives 2002/95/EC, 2002/
96/EC, 2003/108/EC). The appliance
does not contain substances in quantities
sufficient to be considered hazardous to
health and the environment, in accordance
with current European directives.
To dispose of the appliance:
• Remove the doors and leave the
accessories (racks and trays) in their
usual working positions, so that children
cannot get stuck in the oven
compartment.
Power voltage
Danger of electrocution
• Disconnect the main power supply.
• Disconnect the power cable from the
electrical system.
• Cut the power supply cable and remove
it along with the plug.
• Consign the appliance to the
appropriate selective collection centres
for electrical and electronic equipment
waste, or deliver it back to the retailer
when purchasing an equivalent product,
on a one for one basis.
5