Smeg Oven User Manual page 28

Selecting a recipe
The appliance is equipped with
preset recipes and 3 free recipes.
A recipe is a combination of preset
functions, temperatures, cooking
times and the shelf where to place
the food.
1. In the ON status alone, a recipe can be
selected by simply turning the On/off
knob to the right or to the left.
2. The selected recipe will light up on the
display. Cooking will start with the preset
parameters (symbols
When the preset temperature is reached,
a sequence of acoustic signals will
sound and the display and the
temperature selection knob will start to
flash to indicate that food can now be
put into the oven. The oven will maintain
its internal temperature and remain in this
condition until the temperature selection
knob is pressed to start cooking. The
cooking time as specified in the table
"Table of predefined recipes:" starts from
this moment.
3. To switch the appliance completely off,
hold the On/off knob down for 2
seconds.
Modifying the set data
During cooking with a recipe, it is possible
to modify the preset temperature by turning
the temperature selection knob.
30
Use
and lit up).
To alter the time, press the temperature
selection knob then turn it right or left.
The modifications to the set data
must be carried out when both
symbols
Programmed cooking with a recipe
After selecting the required recipe you can
set programmed cooking:
1. Press the temperature selection knob
within 5 seconds.
together with the cooking end time.
2. Turn the knob. A few seconds after the
last knob is pressed, symbols
will stop flashing and from that point
the appliance will wait for the cooking
start time.
3. To switch the appliance completely off,
hold the On/off knob down for 2
seconds.
, are steadily lit.
will appear
and