Smeg Hob Instructions For The User page 19

Instructions for the user
After the setting, to view the cooking time left press the key; to view the cooking end time press the
key. The logic prevents the setting of incompatible values (e.g. the programmer will not accept a
cooking end time with a duration which is too long for this value).
9.4 End of cooking
At the end of the cooking time the oven will switch off automatically and simultaneously a buzzer will
start to sound intermittently.
After the buzzer has been deactivated, the display will return to show the current time together with the
symbol to indicate that the oven has returned to manual use mode.
9.5 Timer
The programmer can also be used as an ordinary timer. Press the button and the display will show
the figures ; keep it pressed and simultaneously press the value modification buttons or
. When the key is released the programmed count will start and the display will show the current
time and the symbol
After the setting, to display the time left press the button.
In timer mode, the system will not cut out operation of the oven at the end of the set time.
9.6 Adjusting the buzzer volume
The buzzer volume can be varied (3 settings) while it is in operation by pressing .
9.7 Stopping the buzzer
The buzzer stops automatically after seven minutes. It can be stopped manually by pressing the
and buttons together. To switch off the oven, return all the knobs to the 0 setting in sequence.
9.8 Deleting the set data
With the program set, hold down the button of the function to be deleted, while at the same time going to
the value by pressing the value modification buttons and . The programmer will
interpret deletion of the duration as the end of cooking.
9.9 Modifying the set data
The set cooking data can be modified at any time by holding down the button of the function for
modification and at the same time pressing the value modification buttons or .
45