Smeg Oven Instructions Manual page 19

segment will light up (the example below
shows a cooking time of 1 hour).
3. Once the required time is obtained,
cooking will start about 5 seconds after
the last pressure on
4. The display will show the current time,
represented by the constantly illuminated
segments, and the minutes left to the end
of cooking, represented by the flashing
segments (each flashing segment means
12 minutes of cooking time left).
5. At the end of cooking, the timer will
switch the oven heating elements off, the
buzzer will start to sound and the
numbers on the dial will flash.
6. The set program can be cancelled: press
key for 2 seconds to cancel the set
time and switch the oven off manually if a
cooking operation is in progress.
It is not possible to set a cooking
time of more than 12 hours.
Use
or .
Programmed cooking
Programmed cooking is the
function which allows a cooking
operation to be started at a set
time and then ended after a
specific length of time set by the
user.
1. Set the cooking time as described in the
previous point "Timed cooking".
2. Within 5 seconds of last pressing key
or , press key
cooking end time. Symbol
on the display together with the current
time, with the internal segments
illuminated to show the end of cooking
time.
3. Press key or
end time.
4. 5 seconds after the last key is pressed,
the display will show the current time and
the cooking start and end times, which
will be represented by the illuminated
internal segments. As soon as the current
time reaches the set cooking start time,
the internal segments will flash and the
oven starts cooking.
5. At the end of cooking, the timer will
switch the oven heating elements off, the
buzzer will start to sound and the
numbers on the dial will flash.
again to set the
will flash
to set the cooking
21