Dvc To Vcr Dubbing - Toshiba D-VR18DTKB Owner's Manual

E9NG1BD_EN.book Page 86 Monday, April 7, 2008 5:54 PM
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record tab. To record on it later,
cover the hole with cellophane tape.
Record tab
One-touch Timer Recording
VCR VCR
This feature allows you to set the recording length
simply by pressing [REC I].
1
Turn on the unit and insert a
recordable tape.
Make sure that the TV input is set on the unit.
2
Press [VCR].
3
Select the recording mode using
[REC MODE]. (See page 85.)
4
Select the desired channel to record
using [PROG.
[the Number buttons].
5
Press [REC I] repeatedly until the
desired recording time (30 minutes
to 8 hours) appears on the TV
screen.
One-touch Timer Recording will start.
Normal Recording
8:00
• When the unit reaches the specified time, it will be
turned off automatically.
• To change the recording length during One-touch
Timer Recording, press [REC I] repeatedly until the
desired length appears.
• To cancel One-touch Timer Recording within the
specified time, press [STOP S].
Hint
• The remaining recording time will appear on the TV
screen during One-touch Timer Recording. Press
[DISPLAY] to see it on the TV screen.
Note
• If VCR One-touch Timer Recording is completed
during DVD playback or recording, the VCR will be
in stop mode and the DVD keeps the current mode.
• You cannot use the pause function during One-
touch Timer Recording.
• When One-touch Timer Recording is finished and
the power is turned off, the unit will switch to the
timer-standby mode automatically if a timer
recording has been programmed. Press
[TIMER SET] to cancel the timer-standby mode in
order to use the unit continuously.
86
EN
/ ] or
0:30
1:00
7:30

DVC to VCR Dubbing

VCR VCR
This function helps you to copy the contents in the
DVC (digital video camcorder) to VCR.
Preparing for DV dubbing (DVC to VCR):
• Insert a recordable videotape.
• Make sure your DVC is in video mode.
1
Press [VCR].
2
Select "DV" channel using
[INPUT SELECT ] or
[PROG. / ].
3
Select the recording mode using
[REC MODE].(See page 85.)
4
Stop or pause the DVC where you
want to start dubbing.
5
Play back the DVC
6
Press [REC I].
The dubbing will start.
Note
• Dubbing will start from where the tape is stopped.