Setting A Disc To Protect; Finalising Discs - Toshiba D-VR18DTKB Owner's Manual

E9NG1BD_EN.book Page 52 Monday, April 7, 2008 5:54 PM

Setting a Disc to Protect

VR
DVD-RW DVD-RW DVD+RW DVD+RW
To prevent accidental over-recording, editing or
erasing of recordings, you can protect them using
"Setup" menu.
Insert a recordable disc.
1
In stop mode, press [SETUP].
2
Select "DVD Menu" using [U / D],
then press [ENTER / OK].
3
Select "Disc Protect OFF
using [U / D], then press
[ENTER / OK].
4
Select "Yes" using [U / D], then
press [ENTER / OK].
The disc is protected.
5
Press [SETUP] to exit.
Note
• The Disc Protect setting is available only when a
disc recorded in VR or +VR mode is inserted.
• You can select only "Disc Protect ON
when a protected disc is inserted.
To cancel the disc protect:
• Select "Disc Protect ON
select "Yes".
• If you insert a disc protected with this unit, "Disc
Protect ON OFF" will appear instead of
"OFF ON".
52
EN

Finalising Discs

DVD+R D D VD+R VD+R
You will need to finalise discs to play them back in
other players.
Finalising may take between several minutes and an
hour.
A shorter recording period on the disc will require a
longer time period for finalisation. Do not unplug the
mains cable during finalisation.
Insert a recordable disc before
ON"
finalising.
1
2
3
4
OFF"
To cancel finalising (DVD-RW disc only):
OFF" at the step 3, then
5
Video VR
DVD-RW D D VD-R VD-RW W DVD-RW DVD-RW DVD-R DVD-R
D D VD+R DVD+R VD+R
In stop mode, press [SETUP].
Select "DVD Menu" using [U / D],
then press [ENTER / OK].
Select "Finalise" using [U / D], then
press [ENTER / OK].
Select "Yes" using [U / D], then
press [ENTER / OK].
e.g.) VR mode DVD-RW disc
Finalise disc?
Yes
No
Finalising will start.
At the step 4, press [STOP S]. Select "Yes" using
[U / D], then press [ENTER / OK]. Finalising is
cancelled and the unit switches to stop mode.
Do you want to cancel ?
Yes
No
Finalising
If " " appears when [STOP S] is pressed, you
cannot cancel finalising because the finalising has
already reached at a critical point in its process.
If "No" is selected and [ENTER / OK] or
[RETURN / BACK] is pressed, finalising is
continued.
You cannot cancel finalising a DVD-R and
DVD+RW/+R disc once it has started.
Finalising is complete.
DVD+RW D D VD+R VD+RW W
10%