Before Recording - Panasonic SC-PM18 Operating Instructions Manual

A
/FF,
B
To protect tapes against further recording.
Tab for side B
To re-record
Normal position tape
C
1
18
RQT6686
/REW
Side A
Tab for side A
Adhesive tape
Cassette tapes
To fast-forward or rewind the tape
A
Press [g
mode.
To rewind
[g 4 4 4 4 4 /REW]
To find the beginning of a program
(TPS: Tape Program Sensor)
TPS finds the beginning of a track and resumes play from
there. Each press increases the number of tracks skipped,
up to a maximum of 9.
Press [g 4 4 4 4 4 /REW] or [f 3 3 3 3 3 /FF] during play.
Notes
The TPS function searches for silent parts of about 4
seconds in length which are normally found between tunes.
As a result, it may not function properly in the following
cases:
• With short silent parts
• When noise occurs between tunes
• With silent parts found within tunes

Before recording

Types of tapes which can be recorded correctly
Use normal position tapes.
High position and metal position tapes can be used, but the
unit will not be able to record or erase them correctly.
B Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
The effect of volume and sound quality on
recording
These have no effect on recording.
3
They can be changed for playback.
C
To erase a recorded sound
1
2
Press [TAPE -] and then [STOP L, –DEMO].
3
Insert the recorded cassette with the tape facing in.
Press [[/ J REC].
Your attention is drawn to the fact that recording pre-
recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
/REW] or [f /FF]
4 4 4 4 4 3 3 3 3 3
To fast-forward
[f 3 3 3 3 3 /FF]
in the stop