Panasonic SC-PM18 Operating Instructions Manual page 13

,
STOP DEMO
CD CHECK
2 3
1
CD CHANGE
2
CD 1 CD 2 CD 3
3
CD 1 CD 2 CD 3
CD indicator
Track number
4
VOLUME
UP
DOWN
A
CD CHECK
CD CHECK
CD
/
4
1
CD 4 CD 5
Label must face upward.
Tray
Disc tray
number
CD 4 CD 5
Elapsed playing time
CDs
Listening to a CD placed in a
specific tray
Preparation: Press [CD 2/J] and then [STOP L, –DEMO].
Selecting the desired tray number and
placing a CD in it
1
Press [c CD CHANGE].
2
(Within about 10 seconds)
Press [CD 1] ~ [CD 5] to open the tray and
insert the CD.
Press [c CD CHANGE] again to close the tray.
Repeat steps 1 and 2 to insert other CDs. You can load
up to 5 CDs.
Listening to the CD placed in a specific tray
3
Press [CD 1] ~ [CD 5] to start play.
The selected CD is played from the first track to the last
track in order. After the last track, the player stops
automatically.
4
Adjust the volume.
To remove the CD
While one CD is playing (except in All-Disc Random play or
program play), you can change the CDs in the other trays.
1 Press [c CD CHANGE].
2 Press [CD 1] ~ [CD 5].
Press [c CD CHANGE] again to close the tray.
To check which tray the CD is in (CD CHECK)
A
The CD check feature lets you check whether a 12cm CD is
in a tray.
Press [CD CHECK].
If the player is stopped, all trays will open.
If a CD is being played, the corresponding tray will not open.
Press [CD CHECK] again to close the trays.
• Do not remove or insert CDs during a CD check.
• Do not pull out the trays during a CD check.
13
RQT6686