Panasonic LUMIX DMC-FZ38 Operating Instructions Manual page 79

Note
•
Focus, exposure and white balance are fixed to the settings used for the first picture.
•
When the self-timer is used, the number of recordable pictures in Burst Mode is fixed to 3.
•
If you are following a moving subject while taking pictures in a place (landscape) indoors,
outdoors etc. where there is a large difference between the light and shade, it may take time
until the exposure is stable. If burst is used at this time, the exposure may not become optimal.
•
The burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high etc.
•
Burst Mode is not cancelled when the camera is switched off.
•
If you take pictures in Burst Mode with the built-in memory, it will take time to write the picture
data.
•
[Œ] is set for the flash when burst is set.
•
Auto Bracket/Colour Bracket is cancelled when burst is set.
•
You cannot use Burst Mode in following conditions.
–
In [PANORAMA ASSIST], [HI-SPEED BURST], [FLASH BURST], [STARRY SKY],
[PIN HOLE], [FILM GRAIN], [HIGH DYNAMIC] and [PHOTO FRAME] in Scene Mode
–
When [QUALITY] is set to [
–
When recording motion pictures
Advanced (Recording pictures)
] or [ ]
- 79 -