Panasonic LUMIX DMC-FZ38 Operating Instructions Manual page 35

w [RESET]
•
When the [RESET] setting is selected during recording, the operation that resets the lens is
also performed at the same time. You will hear the sound of the lens operating but this is
normal and not indicative of malfunctioning.
•
When the [REC] Mode settings are reset, data registered with [FACE RECOG.] will be also
reset, too.
•
When [SETUP] menu settings are reset, the following settings are also reset. In addition,
[ROTATE DISP.] (P165)
Mode menu.
–
The birthday and name settings for [BABY1]/[BABY2]
–
The [TRAVEL DATE]
–
The [WORLD TIME]
–
The [CUST. SET MEM.]
–
Position memorised in [ZOOM RESUME]/[MENU RESUME].
•
The folder number and the clock setting are not changed.
x [USB MODE]
•
When [PC] is selected, the camera is connected via the "USB Mass Storage" communication
system.
•
When [PictBridge(PTP)] is selected, the camera is connected via the "PTP (Picture Transfer
Protocol)" communication system.
| [VIDEO OUT]
•
This will work when the AV cable is connected.
Preparation
The [REC] or [SETUP] menu settings are reset to the initial
settings.
is set to [ON], and [FAVORITE]
(P124) setting. (Departure date, return date, destination)
(P127) setting.
(P88) setting.
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
Set to match the colour television system in each country.
(Playback Mode only)
[NTSC]: Video output is set to NTSC system.
[PAL]: Video output is set to PAL system.
(P166)
(P98) and [PET]
- 35 -
is set to [OFF] in [PLAYBACK]
(P99) in Scene Mode.