Panasonic LUMIX DMC-FZ38 Operating Instructions Manual page 178

∫ Other linked operations
Turning the power off:
If you use the remote control for the TV to turn off the power, the power on this unit also
turns off. (When connecting the unit to a PC with a USB cable, the power will not turn off.)
Automatic input switching:
•
If you connect with a HDMI mini cable and then turn on the power on this unit, the input channel
on the TV automatically switches to this unit's screen. If the TV's power is in standby status, it
will turn on automatically (if [Set] has been selected for the TV's [Power on link] setting).
•
Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch the input channel. (For details on how to
switch input, please read the operating instructions for the TV.)
•
If VIERA Link does not work properly, refer to page 212.
Note
•
If you are unsure whether or not the TV you are using are compatible with VIERA Link, read the
operating instructions for the devices.
•
Available linked operations between this unit and a Panasonic TV is different depending on the
types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating
instructions of the TV for the operations that support on the TV.
•
Operation is not possible with a cable that is not based on the HDMI standard.
Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15,
RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
•
VIERA Link will not work even if you connect the HDMI mini cable while the unit is connected to
the PC or the printer.
•
[HDMI MODE] (P36)
Outputting to HDMI:
–
When [PICTURE] is selected in the [MODE PLAY]
–
When [PICTURE ONLY] is selected in the [SLIDE SHOW]
–
When [CATEGORY SELECTION]
–
When [CATEGORY PLAY]
When the [VIERA Link] is set to [ON]:
–
During playback of still pictures on one screen after selecting [
screen
–
When [PICTURE ONLY] is selected for the [SLIDE SHOW]
–
When [CATEGORY SELECTION]
–
When [CATEGORY PLAY]
¢ Other than [
–
It will be output as [720p] except for the above conditions.
•
If you have set [HDMI MODE]
TV screen for one screen display, the screen may go dark for a short time when the HDMI
output resolution changes. This is not a malfunction.
•
If the picture is disrupted when [HDMI MODE]
setting to [720p].
•
[ ] ([TRAVEL DATE]) or [
[CATEGORY SELECTION] of the [SLIDE SHOW] cannot be selected when the [
on the TV screen is selected.
Connecting to other equipment
[1080i] is valid only for the following conditions:
¢
is selected in the [SLIDE SHOW]
¢
is selected
¢
is selected for the [SLIDE SHOW]
¢
is selected in the [ALL] and [
] (travel date) and [ Í
(P36) to [AUTO] or [1080i] on this unit and selected [
Í
] ([AVCHD Lite], [MOTION JPEG]) in the
] ([AVCHD Lite], [MOTION JPEG])
(P36) is set to [AUTO] or [1080i], change the
- 178 -
] displayed on the TV
]
] displayed
] on the