Panasonic LUMIX DMC-FZ38 Operating Instructions Manual page 110

•
Refer to P149 for the [MOTION PICTURE] Mode menu.
•
The flash setting is fixed to [Œ].
•
Refer to P215 for information about the available recording time.
•
The available recording time displayed on the screen may not decrease regularly.
•
Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
•
The operational sound of the zoom or button operation may be recorded when it is operated
during the recording of a motion picture.
•
The screen may be blacked out momentarily, or the unit may record noise due to static
electricity or electromagnetic waves etc. depending on the environment of the motion picture
recording.
•
When operating the zoom in recording motion pictures, it may take time to come into focus.
•
If the Extra Optical Zoom was used before pressing the motion picture button, those settings
will be cleared, so the focus range will change dramatically.
•
When the aspect ratio setting is different in still and motion pictures, the angle of view changes
at the start of motion picture recording. When [
view during motion picture recording is displayed.
•
In recording motion pictures, the following functions cannot be used.
–
[ ], [ƒ] and [Ù] in [AF MODE]
–
Direction detection function
–
Extra optical zoom
–
[FACE RECOG.]/[ISO LIMIT SET]
•
It is recommended to use a fully charged battery or AC adaptor (optional) when recording
motion pictures.
•
If while recording motion pictures using the AC adaptor (optional) the power supply is cut off
due to a power cut or if the AC adaptor (optional) is disconnected etc., the motion picture being
recorded will not be recorded.
Advanced (Recording pictures)
REC AREA]
- 110 -
(P32) is set to [ON], angle of