∫ Usable functions
Operate with the remote control for the TV.
1) Multi playback
Press red button on the TV remote control to switch the
type of data for playback.
•
The type of data for playback changes in the order of [ALL]
>
[
]
[
Select the picture with 3/4/2/1 and press 2 for one
screen display.
•
You can set the slide show etc. when you press
2) One screen display
Select the image with 2/1.
Recording information is displayed with 3.
You can return to multi playback (1) with 4.
•
When you select a motion picture and perform one screen display, press
the motion picture.
•
During motion picture playback, use 2/1 for back/forward and 4 to stop playback.
3) Slide show
Display the slide show setting screen by pressing red
button in the one screen display (2).
Select [START] and press 2.
The screen will be returned to one screen display (2) by
pressing 4 to finish the slide show.
•
Press
to pause. When the slideshow is paused, you can move between the pictures
2
using
2
/
1
.
•
Press
to display the slide show setting screen.
1
•
Playing audio in the slideshow
Set [MUSIC] to [OFF] and [AUDIO] to [ON] in the slide show setting screen.
•
Turning control icon display on and off
Operation icons can be hidden when you press
when you press
1
Note
•
It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2
or more HDMI input terminals on the TV.
•
[VIERA Link]
When the
will be limited.
•
VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV
for how to set etc.)
•
If you are not using VIERA Link, set
Connecting to other equipment
>
>
]
[
]
[ALL].
while the operation icons are hidden.
(P37)
of this unit is set to [ON], operation using the button on this unit
[VIERA Link]
.
1
. Also, operation icons will be displayed
3
(P37)
to [OFF].
- 177 -
>
to playback
2