Remote Control - Sanyo PLC-XE50A Owner's Manual

Part Names and Functions

Remote Control

e
r
t
y
u
You can turn on or operate the projector
ONLY via the remote control.
Make sure not to lose the remote control.
12
w q
/
!5
!4
!3
!2
!1
i o !0
q ON/STAND-BY button
Turn the projector on or off (pp.19, 20).
w VIDEO button
Select VIDEO input source (pp.24, 36).
e COMPUTER button
Select COMPUTER input source (pp.24, 26, 37).
r MENU button
Open or close the On-Screen Menu (p.21).
t Point (VOLUME + / –) buttons
ed 7 8
– Select an item or adjust the value in the On-Screen
Menu. (p.21)
– Pan the image in Digital zoom + mode (p.35).
– Adjust the volume level (Point
y SELECT button
– Execute the selected item (p.21).
– Expand or compress the image in Digital zoom mode.
(p.35).
u D.ZOOM buttons
ed
Zoom in and out the images (pp.25, 35).
i FREEZE button
Freeze the picture (p.24).
o NO SHOW button
Temporarily turn off the image on the screen (p.25).
!0 LAMP CONTROL button
Select the lamp mode (pp.25, 49).
!1 MUTE button
Mute the sound (p.24).
!2 P-TIMER button
Operate the P-timer function (p.25).
!3 IMAGE button
Select the image level (pp.25, 31, 39).
!4 AUTO PC button
Automatically adjust the computer image to its optimum
setting (pp.25, 28).
!5 KEYSTONE button
Correct the keystone distortion (pp.23, 44).
✔Note:
To ensure safe operation, observe the following precautions:
– Do not bend, drop, or expose the remote control to
moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply benzene,
thinner, splay, or any other chemicals.
buttons) (p.24).
7 8