Indicators - Sanyo PLC-XE50A Owner's Manual

Indicators

q POWER indicator
– Lights red when the projector is in stand-by mode.
– Lights green during operations.
– Blinks green in the Power management mode (pp.49, 63).
w WARNING TEMP . indicator
– Lights red when the projector detects an abnormal condition.
– Blinks red when the internal temperature of the projector exceeds the operating range (pp.53, 64).
e WARNING FILTER indicator
Light orange when the clogging of the filter is detected or the filter counter reaches a time set in the timer
–
setting, urging immediate filter/ filter cartridge replacement (pp.52, 64).
r LAMP REPLACE indicator
Turn yellow when the life of the projection lamp draws to an end (pp.56, 64).
w e
q
Part Names and Functions
r
11