Screen Size Adjustment - Sanyo PLC-XE50A Owner's Manual

Computer Input
Store
To store the adjusted data, select "Store" and press the
SELECT button. The Image Level Menu appears. Use the
Point buttons to choose one of the four image level and
ed
press the SELECT button. A confirmation box appears and
then select "Yes. "
The stored data can be called up by selecting "Image" in
the Image Level Selection on page 31-32.
Quit
Exit the Image Adjust Menu.

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image size.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Screen Menu icon.
2
Use the Point
pointer to the desired function and then press the
SELECT button.
Normal
Provide the image to fit the screen size with the original
aspect ratio of input signal.
True
Provide the image in its original size. When the original
image size is larger than the screen size (1024 x 768), the
projector automatically switches to the panning mode. Use
the Point buttons to pan the image. When adjusted,
ed7 8
the arrows turn red. When reached to the correction limit,
the arrows disappear.
Wide
Provide the image to fit wide video aspect ratio (16:9) by
expanding the image width uniformly. This function can be
used to provide the squeezed video signal at 16:9.
Full
Provide the full screen image.
34
buttons to move the red
7 8
buttons and move the red frame
ed
Move the red frame
pointer to the desired
image level (from Image
1 to 4) and then press
the SELECT button.
Store item
Press the SELECT button
at this item to store the
adjusted data.
Screen Menu
Move the red frame pointer
to the function and press
the SELECT button.
✔Note:
•The Screen Menu, except for "Normal"
and "Custom", cannot be operated when
720p, 1035i, or 1080i is selected in the PC
System Menu (p.27).
•This projector cannot display any
resolution higher than 1600 x 1200. If your
computer's resolution is higher than that,
lower the resolution before connecting to
the projector.
•The image data other than 1024 x 768 is
modified to fit the screen size in initial
mode.
•True, Full, and Digital zoom +/– cannot be
selected when 480i, 575i, 480p, or 575p
is selected in the PC System Menu (p.27).
A confirmation
box appears, then
select "Yes. "
Screen Menu icon