Sanyo PLC-XE50A Owner's Manual page 50

Setting
Security (PIN code lock setting)
This function allows you to use PIN code lock function to
set the security for the projector operation.
PIN code lock
This function prevents the projector from being operated
by unauthorized persons and provides the following
setting options for security.
Off...... The projector is not locked with the PIN code.
On1...... Requires to enter a PIN code every time
turning on the projector.
On2...... Requires to enter a PIN code to operate the
projector once the power cord is unplugged;
as long as the AC power cord is connected,
the projector can be operated without a
PIN code.
Whenever you change the PIN code lock setting or the
PIN code (a four-digit number), you are required to enter
the PIN code. "1234" is set as the initial PIN code at the
factory.
Enter a PIN code
Select a number by pressing the Point
And then press the Point
and move the pointer. The number changes to "✳". If
you fixed an incorrect number, move the pointer to the
number you want to correct by pressing the Point
button, and then select the correct number by pressing
the Point buttons.
ed
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the pointer to
"Set" by pressing the Point
button so that you can change the following PIN code
lock settings. If you entered an incorrect PIN code, "PIN
code" and the number (✳✳✳✳) turns red. Enter a correct
PIN code all over again.
Change the PIN code lock setting
Select Off, On1, or On2 with the Point
then move the red frame pointer to "Quit" with the Point
button. Press the SELECT button to close the dialog
d
box.
50
buttons.
ed
button to fix the number
8
7
button. Press the SELECT
8
buttons and
7 8
PIN code lock
When the projector is locked
with the PIN code, the PIN
code lock symbol appears on
the menu bar.
Enter a PIN code
The input numbers change
to "✳" for security reasons.
Move the pointer to "Set" by
pressing the Point
And then press the SELECT
button.
Change the PIN code lock setting
Select a desired setting with the
Point 7 8 buttons.
button.
8