NETGEAR RangeMax WNDR3300 Setup Manual page 32

Wireless Router Setup Manual
Table 2. Wireless Router Default Configuration Settings (continued)
Feature
Firewall
Inbound (communications coming in from
the Internet)
Outbound (communications going out to
the Internet)
Wireless
Wireless Communication
SSID Name
Security
Broadcast SSID
Transmission Speed
Country/Region
RF Channel
Operating Mode
Data Rate
Output Power
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will
vary. Network conditions and environmental factors, including volume of network traffic, building
materials and construction, and network overhead lower actual data throughput rate.
Network Protocol and Standards Compatibility
Data and Routing Protocols:
Power Adapter
North America:
United Kingdom, Australia:
Europe:
Japan:
All regions (output):
Physical Specifications
Dimensions:
28
Default Setting
Disabled (bars all unsolicited requests)
Enabled (all)
Enabled
NETGEAR
Disabled
Enabled
Auto a
United States in the US, otherwise varies by region
6 until region selected
• Mode 1. 802.11N 2.4G mode (enabled)
• Mode 2. 802.11N 5G + Legacy 802.11g at 2.4G
(disabled)
Best
Full
TCP/IP, RIP-1, RIP-2, DHCP
PPP over Ethernet (PPPoE)
120V, 60 Hz, input
240V, 50 Hz, input
230V, 50 Hz, input
100V, 50/60 Hz, input
12 V DC @ 1.5A output, 18W maximum
28 x 175 x 119 mm (1.1 x 6.89 x 4.68 in.)
v1.0, September 2007
Default Configuration