NETGEAR RangeMax WNDR3300 Setup Manual page 14

Wireless Router Setup Manual
g. Locate the cable you removed from the modem in
into a LAN port on the router such as LAN port 1.
Figure 8
Your network cables are connected, and you are ready to start your network.
2. Start your network in the correct sequence.
Failure to start or restart your network in the correct sequence could prevent you
from accessing the Internet.
a. First, plug in and turn on the cable or DSL modem. Wait 2 minutes.
b. Now, plug the power cord into your wireless router and into a power outlet. Wait 1 minute.
c. Last, turn on your computer.
For DSL customers, if software logs you in to the Internet, do not run that
software. You might need to go to the Internet Explorer Tools menu, Internet
Options, then click the Connections tab where you can select Never dial a
connection.
10
Step
4
Internet
v1.0, September 2007
c. Securely insert that cable (4)
Getting to Know Your Wireless Router