How Do I Restore The Default Password And Configuration Settings - NETGEAR RangeMax WNDR3300 Setup Manual

Wireless Router Setup Manual
A DNS server is a host on the Internet that translates Internet names (such as www addresses)
to numeric IP addresses. Typically your ISP provides the addresses of one or two DNS servers
for your use. If you entered a DNS address when you configured the wireless router, restart
your computer. Alternatively, you can configure your computer manually with DNS addresses,
as explained in the documentation for your computer.
• Your computer might not have the wireless router configured as its default gateway.
Restart the computer, and verify that the wireless router address (192.168.1.1) is listed by your
computer as the default gateway address.
The factory default wireless router address is 192.168.1.1. However, if the router
detects a conflict with the address it gets from your modem, it automatically picks a
different address for itself. In this case, you can log in to the router using
www.routerlogin.net to verify its LAN IP address. Click the LAN IP Setup link in
the Advanced menu. Take note of the LAN TCP/IP setup IP address, which should
match the default gateway IP address on your computer.
How Do I Restore the Default Password and Configuration
Settings?
This section explains how to restore the factory default configuration settings, changing the
router's administration password to password and the IP address to 192.168.1.1.
This procedure will erase all the current configuration settings and restore the factory
defaults.
To restore the factory default configuration settings, use the reset button on the rear panel
of the router:
1. Use a sharp object like a pen or a paper clip to press and hold the default reset button for about
20 seconds (see "Restoring the Default User Name and Password" on page
Power light begins to blink.
Release the reset button, and wait for the router to restart and for the Power light to stop
2.
blinking and become solid green.
24
v1.0, September 2007
30), until the
Help with Troubleshooting