NETGEAR RangeMax WNDR3300 Setup Manual page 15

1
Figure 9
d. Check the wireless router status lights to verify the following:
• Power. The power light (1) should turn solid green. If it does not, see
Functions Are Not Working" on page
• Mode. The Mode light (2) should be on: the Mode light (3) should be off.
• Internet: The Internet port light (4) should be lit. If it is not, make sure that the
Ethernet cable is securely attached to the wireless router Internet port and that the
modem, and the modem is powered on.
• LAN. A LAN light (5) should be lit. Green indicates that your computer is
communicating at 100 Mbps; amber indicates 10 Mbps. If a LAN light is not lit, check
that the Ethernet cable from the computer to the router is securely attached at both
ends, and that the computer is turned on.
Connect to the wireless router by typing http://www.routerlogin.net in the address field of
3.
your browser, and then click Enter.
Figure 10
Connect to the wireless router by typing any one of these three URLs in the address
field of your browser, then clicking Enter:
http://www.routerlogin.net
•
http://www.routerlogin.com
•
• http://192.168.1.1
Getting to Know Your Wireless Router
2.4 GHz 5GHz
2 3
20.
v1.0, September 2007
Wireless Router Setup Manual
4
5
"Basic
11