Library - NAD T 748 Owner's Manual

Av surround sound receiver
Hide thumbs Also See for T 748:
Table of Contents

Advertisement

LIBRARY

The AVR 4 can store a different library of default NAD codes for each of its DEVICE SELECTOR "pages. "
If the original default library does not control your NAD CD player, DVD player, or other component,
follow the procedure below to change the library code. Refer as well to the table below for a list of
applicable NAD Library Codes with their corresponding NAD models.
LOAD ANOTHER LIBRARY CODE
Example: Load NAD DVD Player T 517 library code to AVR 4's "BD" device.
1 Press and hold [BD] in the DEVICE SELECTOR section of AVR 4.
2 While holding down the device button [BD], press "2" and "2" using AVR 4's numeric buttons. "22" is
the corresponding library code for T 517.
3 Press [ENTER] while still holding down the device button [BD]. The BD device selector will flash
once to indicate that the library input is successful. Both the device selector button [BD] and
[ENTER] can now be released.
RESET THE AVR 4 TO ITS DEFAULT SETTINGS
The AVR 4 can be restored to its factory settings, including default libraries, via the following
procedures
1 Press and hold [ON] and [DELETE] buttons for about 10 seconds until the AMP device button lights
up.
2 Within two seconds of the AMP device button lighting up, release both buttons. If the reset mode
is successful, the [BD] device button will flash twice.
TABLE OF LIBRARY CODES APPLICABLE TO AVR 4 REMOTE CONTROL
LIBRARY CODE
NAD PRODUCT DESCRIPTION
10
Default library for "AMP" page
11
Zone 2
20
C 515BEE, C 545BEE, C 565BEE
21
T 535, T 585, M55; DVD section of L 54, VISO TWO, VISO FIVE
22
T 513, T 514, T 515, T 517
23
T 587, T 557, T 577, M56
30
IPD 1
31
IPD 2
Default library for "TUN" page; Tuner section of C 725BEE, T 175, T737, T 748, T 755, T 765,
40
T 775, T 748
41
C 422, C 425, C 426
42
C 445
NOTE
The AVR 4 may not necessarily contain all the control buttons applicable for the above-mentioned
NAD products. Use the prescribed remote control of the specific NAD product for a full compliment
of the applicable remote control buttons.
IDENTIFICATION OF CONTROLS
AVR 4 REMOTE CONTROL
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents