Library - NAD T 748 Owner's Manual

IDENTIFICATION OF CONTROLS
AVR 4 REMOTE CONTROL
12
TUNER CONTROL (USE WITH T 748 TUNER SECTION AND OTHER COMPATIBLE NAD
RECEIVER, AM/FM/DAB TUNER MODELS)
Set the DEVICE SELECTOR to "TUN" in order to gain access to these buttons. Refer to the corresponding
labels printed in the remote control faceplate and their respective assigned buttons to make use
of these functions. Some of the control buttons below are applicable only to specific NAD Receiver
or Tuner models; check the owner's manual of your NAD Receiver or Tuner for control button
compatibility. You can also load the applicable NAD code library to this device so that it can be made
compatible with your other NAD equipment. Refer to the section below about "LIBRARY" on how to
load a NAD code library.
TUNE [ 7/8 ] or [ A/S ]: Tune forward or backwards.
INFO: Repeatedly pressing this button will show information as supplied by the current radio
station. The applicable display contents include related DAB display information and RDS broadcast
data.
PRESET [ 9/0 ] or [ D/F ]: Step up or down Preset numbers.
[ A/S ]: In combination with [TUNER MODE] or other compatible buttons, select through
applicable DAB menu options.
ENTER: Select Preset or Tune mode at AM/FM band. Display signal strength at DAB mode.
AM/FM/DB: Select DAB, FM or AM band, as applicable.
TUNER MODE: In FM mode, toggle between "FM Mute On" and "FM Mute Off". At DAB mode,
use the [TUNER MODE] button in combination with the front panel [A/S] and [ENTER] buttons to
activate DAB menu options.
BLEND: Engage or disengage BLEND feature. This is not applicable to T 748.
MEMORY: Save current station to a Preset number.
DELETE: Delete selected Preset number.
NOTE
For iPod player-specific control buttons, please refer to "CONTROL FEATURES" under "OPERATION -
LISTENING TO YOUR iPod PLAYER".

LIBRARY

The AVR 4 can store a different library of default NAD codes for each of its DEVICE SELECTOR "pages. "
If the original default library does not control your NAD CD player, DVD player, or other component,
follow the procedure below to change the library code. Refer as well to the table below for a list of
applicable NAD Library Codes with their corresponding NAD models.
LOAD ANOTHER LIBRARY CODE
Example: Load NAD DVD Player T 517 library code to AVR 4's "BD" device.
1 Press and hold [BD] in the DEVICE SELECTOR section of AVR 4.
2 While holding down the device button [BD], press "2" and "2" using AVR 4's numeric buttons. "22" is
the corresponding library code for T 517.
3 Press [ENTER] while still holding down the device button [BD]. The BD device selector will flash
once to indicate that the library input is successful. Both the device selector button [BD] and
[ENTER] can now be released.