Nad Ipd 2; To View Videos Or Photos Loaded In Your Ipod - NAD T 748 Owner's Manual

Av surround sound receiver
Hide thumbs Also See for T 748:
Table of Contents

Advertisement

OPERATION
LISTENING TO YOUR iPod PLAYER

NAD IPD 2

The NAD IPD 2 has its own remote control - the DR 1. DR 1 can be used
to control NAD IPD 2 only at "Simple Mode". When using the DR 1 to
command your iPod player docked in the NAD IPD 2, you have to refer to
your iPod player's own display screen to make full use of its feature; there is
no OSD at this condition
In addition to the above commands common to the DR 1, below are the
descriptions of the other DR 1 control buttons.
LIGHT
Press [LIGHT] to turn ON the backlight of your iPod player if it is at idle
mode.
MENU
Press [MENU] to return to previous option or menu selection
ENTER
Press [ENTER] to select an option or start playback.
m (REPEAT)
Toggle to initiate repeat mode as follows - repeat one song, repeat all songs
or cancel repeat mode.
, (RANDOM)
Toggle to initiate playback in random order. There are three random modes
- Shuffle Song, Shuffle Album or Shuffle Off.
36

TO VIEW VIDEOS OR PHOTOS LOADED IN YOUR iPod

Videos or photos uploaded in your iPod can be viewed directly via the
T 748. The following are the steps
1 Make sure that the "TV Out" setting of your iPod's Video Settings menu is
at "On" mode and appropriate "TV Signal" is chosen.
2 Video or photo file selections and playback procedures are managed
directly from your iPod player and not through the T 748. You must exit
completely from the T 748's Setup Menu or Menu Select OSD for you
to be able to navigate through your iPod player's video or photo menu
options. A more direct way is by going to the "iPod Setup" menu and set
"Enabled" to "No".
3 With the NAD IPD's S-VIDEO OUT and AUDIO OUT ports connected to
the T 748's AUDIO 2/S-VIDEO input or to any other assignable input, you
can now directly enjoy via T 748 your video or photo file selections as
uploaded in your iPod. Make sure that you select the correct "Source
Number" of the T 748. Note that if "Enabled" from "iPod Setup" is set
to "No", ensure that Source 5 is enabled and analog audio and video
settings are assigned to "A2" and "S1" respectively.
NOTE
For other navigation functions, please refer to your iPod player's owner's
manual. Depending on the iPod player model, some other functions
maybe controlled using the applicable T 748 navigation controls.
iPod is a trademark of Apple, Inc., registered in the U.S. and other countries.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents