Listening To Your Ipod Player; Connecting The Optional Nad Ipd And Ipod Player To The T 748; Control Features And Settings - NAD T 748 Owner's Manual

The T 748 is equipped with a data port in the rear panel where an optional
"NAD IPD Dock for iPod" (NAD IPD) can be plugged in. With the NAD IPD
linking the T 748 with your own iPod player, you can enjoy listening to your
favorite tracks and playlists as well as view applicable still image and video
playback.
You can control your iPod player using the assigned buttons in the T 748
front panel. And with the corresponding AVR 4 remote control function
keys, you can select the materials stored in your iPod for playback as well as
access many of its functions even from across the room. The optional NAD
IPD also charges your iPod player while it is connected to the T 748.
NOTES
• "NAD IPD Dock for iPod" (NAD IPD) currently has two versions - the NAD
IPD 1 and NAD IPD 2. These two NAD IPD models and later variants are
compatible with the T 748.
• NAD IPD and iPod player are not supplied with your T 748.
• iPod player functions, features and playback capabilities accessible
through T 748 may vary depending on your iPod player model.
• When using the AVR 4 to control the iPod functions, make sure that the
Device Selector is set to "MP. "
CONNECTING THE OPTIONAL NAD IPD AND
iPod PLAYER TO THE T 748
Make sure that all the devices are unplugged before making the
connections.
1 Connect the NAD IPD's DATA PORT to the corresponding "MP DOCK"
data port of the T 748.
2 Connect also the NAD IPD's S-Video out and audio out to the T 748
AUDIO 2/S-VIDEO input (the default iPod source allocation in the T 748).
3 Dock your iPod player into the NAD IPD.
NAVIGATING THE IPOD PLAYER'S FUNCTIONS AND FEATURES
After linking together your iPod player, NAD IPD and the T 748, you can now
plug them IN to their applicable power sources.
1 With your T 748, iPod player and NAD IPD all at power ON state, select
SOURCE 5 (iPod) of your T 748. Your iPod player will show in its display
the NAD logo and below it "OK to disconnect. " On the other hand, the
T 748 VFD will show in the upper line "iPod Menu" and the lower line
"Playlists". The lower line will vary depending on the current menu
selected. At the same time, the T 748 OSD will display the whole iPod
Menu selections like Playlists, Artist, Albums, Genres, Songs, Composers,
Audiobooks and Podcasts.
2 Navigate through the iPod menu selections using a combination of the
[ A/S/D/F ] buttons.
NOTES
• To exit from the iPod Menu at Source 5 (iPod), press [ A ] bringing you to
"Menu Select" OSD. Follow the instructions as prompted.
• Source 5 is defaulted to iPod. For Source 5 (iPod) to be changed and
allocated for other inputs, go to "iPod Setup" menu under the "Source
Setup" menu. At "iPod Setup" menu, set "Enabled" to "No" – you can now
assign Source 5 with another input or setting as desired.

LISTENING TO YOUR iPod PLAYER

CONTROL FEATURES AND SETTINGS

The following control functions and settings are selectable or enabled
using the front panel and AVR 4 remote control buttons. Since the AVR 4
will be the primary controller in most cases, we will focus on remote-
controlled operations.
Note that other NAD IPD models, like the NAD IPD 2, have their own remote
controls. The controls below also apply to the corresponding buttons of the
remote controls of such applicable NAD IPD models.
ENTER
Press [ENTER] to select an option or start playback.
DISP
• During playback, toggle [DISP] key of AVR 4 to show in the T 748 VFD
upper line the Song title, Artist Name and Album title.
• If there is no information available, the display will show "Unknown
Song", "Unknown Artist" or "Unknown Album" as applicable. Aside from
this information, the lower line will display the current title's song
number allocation and time elapsed.
9/0
• During playback or PAUSE mode, press and hold [ 9/0 ] for fast
forward or backward scanning of current song. Release button to
resume normal playback.
• Press [ 0 ] to skip forward to the next song or [ 9 ] to skip back to
the previous song.
[ j ] PAUSE / [ 4 ] PLAY
• Press PAUSE [ j ] during playback to stop playback temporarily. Resume
play by pressing [ 4 ] (Play).
• Toggle [ 4 ] (Play) to alternately switch from PLAY to PAUSE mode and
vice-versa.
OPERATION
35