Auto Power Down Setup - NAD T 748 Owner's Manual

OPERATION
USING THE T 748 – SETUP MENU
7 You can setup up to 5 A/V Presets. These same A/V Presets can also
be associated/defaulted to each Source in the "Source Setup (Normal)"
window as below.
In the above example, "Preset 1" settings are allocated to Source 1.
Whenever Source 1 is accessed, the "Preset 1" settings will be applied to
Source 1.

AUTO POWER DOWN SETUP

The T 748 can be setup to automatically go to standby mode if there is no
user interface interaction within the allocated time. Set "Auto Timer" to
preferred time.
4hrs, 8hrs, 30mins: Set time to allow the T 748 go to standby mode
automatically in the absence of any user interface interaction.
Off: The T 748 remains active even though no user interface interaction
is detected.
28