Setting The Time; Convenient Functions - Panasonic SC-AK14 Operating Instructions Manual

1
2
4
1
2
3
4
A
B

Setting the time

This is a 12-hour display clock.
This example in the figure shows how to set the time for 4:25 p.m..
Switch on the power.
Press [CLOCK/TIMER] to select "CLOCK".
Every time you press the button:
CLOCK
3
Previous display
(within 7 seconds or so)
Press [TUNE/TIME ADJ (3) or (4)] to show the
present time.
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you
set the time.
To display the time when system is ON
Press [CLOCK/TIMER] to select "CLOCK".
At ECO mode on, to display the time when system is OFF
Press [-DISP/–DEMO].
The time will be displayed for about 5 seconds and then the display
will return to whatever was previously displayed.

Convenient functions

Switching displays A
Press [-DISP/–DEMO] to select the desired spectrum
analyzer.
Every time you press the button:
Normal Peak hold
(OFF)
To mute the volume B
by remote control only
This feature is convenient when you have a telephone call, etc.
Press [MUTING].
Press the button again to cancel.
"MUTING" goes out.
Muting can also be canceled by lowering the volume all the
way (--dB).
When the system is turned off, the muting operation will be automatically
canceled.
PLAY REC
A
Aurora Wiper
11
RQT5539