Specifications - International Harvester Company CUB Operator's Manual

SPECIFICA TIONS
tJELT PULLEY
392 rpm
1,665 rpm
1,487 rpm
2, 336 ft. per min.
2,968 ft. per min.
3, 504 ft. per min.
6 in., 7-5/8 in., 9-in.
4-3/4-in. .
System voltage
Generator, Delco-Remy
Voltage regulator, Delco-Remy, Cranking motor, Delco-Remy ,
6 volt
35 amp.
2 unit
Bendix drive
12 volt
25 amp.
/. unitPositive
engagement,push
button controlled
~ position
12-16 voltAGC-I0
amp.
4 position
6-8 volt
SFE-20 amp.
Light switch Lamps -all glass, sealed beam units. ...Fuse
(cartridge type)
CLUTCH
Single-plate, dry-disc, spring-loaded.
6 -1/ 2 in.
FOOT BRAKES
External contracting on drums.
Inte
rnational
Cub Lo-Boy
WHEELS AND TREAD
Front wheels. pneumatic tire size. Rear wheels, pneumatic tire size. Wheelbase Tread, front (standard-fixed axle with
reversible wheels) Tread, fJ"ont (adjustable front axle, 4-in.
intervals) Tread, rear (adjustable-reversible wheels
and rims, 4-in. intervals)
t4.00-12
t8.3-24
61-7/8-in.
40-5/8
and 46-3/8 in.
43
and 49-in.
40-5/8
and 56-5/8 in.
39
to 55-in.
40 to 56 in. 40 to 56-in.
GENERAL
Length, over-all Width, over-all-minimum treads. Width, over-all-maximum treads. Height, over -all (to top of steering wheel) ..Ground
clearance for crops: Under front axle
Under rear axle
Quick-attachable drawbar (adjustable):
Normal height. High and low positions. Lateral adjustment.
99-.
48-
64-
62-20-.
20-
92-in.
48-1/4-in.
64-1/4-in.
56-1/4-in.
14-in.
14-in.
14-3/8 in.
12-3/8 and 16 in.
11-3/8 in. on each
side of center hole
7 to 22 in.
9-1/2-in.
l2-3/4-in.
11 and l4-l/2-in.
ll-3/B-in. on each
side of center hole
4 to 24 -in.
9-l/2-in.
8-1/4 ft.
8-1/4
ft.
Fast-Hitch drawbar: Height above ground. ..
Lateral movement. ...
Minimum turning radius with minimum treads
Withbrakeapplied
t Other pneumatic tire sizes are available.
* Regularly supplied with belt pulley.
Specifications are subject to change without notice
75
t4.00-12
t8.3-24
69-1/4 in.
~/8L/4
L /4
~/4
~/8~/4
in.
in.
in.in.in.in.