Instruments And Controls; Brake Pedals - International Harvester Company CUB Operator's Manual

Illust.4
Instruments and controls (12.volt system).
-BRAKE PEDALS
These pedals are used to stop the
tractor, to hold the tractor in a station-
ary position, or to assist in making sharpturns.
The brake pedal latch (behind the left brake
pedal) is used to latch both brake pedals
together, causing the brakes to operate
simultaneously.
To stop the tractor, latch the pedals
together so both brakes will operate
simultaneously when the pedals are
pressed down.
To hold the tractor in a stationary
position, latch the pedals together,
depress and lock them in this depressed
position by using the brake pedal lock.
A-77082
To assist in making a sharp turn, the
pedals must be operated individually,
depressing the pedal on the side toward
which the turn is to be made.
Illust.4A
Instruments and control s (6-volt system).
4