Using Tel Mode - Sharp UX-108 Operation Manual

Using TEL mode

Using TEL Mode
When the reception mode is set to TEL, you must answer all calls using the
fax machine's handset or an extension phone connected to the same line.
Answering with the fax's handset
1
Pick up the handset when the machine rings.
2
If you hear a fax tone, wait until the display shows RECEIVING and then
replace the handset.
Beep
3
If the other party first talks and then wants to send a fax, press the START
key after speaking (press your START key before the sender presses their
Start key).
• • • • Make sure that the display shows RECEIVING, then replace the handset.
40
Press the
RECEPTION MODE
key until the arrow in
the display points to
TEL.
RECEPTION
MODE
RECEIVING
START
RECEIVING
Note:
If you have set Option Setting
12 (Fax signal receive) to NO, press
the START key to begin reception.
TEL FAX
A.M.